Wednesday, July 4, 2012
Rubber Mold for Turret Doors
In this picture I am putting play clay along the door edge to make it even. I also put a thin coat of Vasiline all over the front of the door. Then I took tiny balls of the play clay to put on the back of the turret door, to temp. attach it to the wood base of the mold. Make sure it is stuck flat.
The play clay wall is finished. Make sure the clay is stuck firmly to the base board.
http://www.polytek.com/ and you can print the instructions from their web site. The mold rubber I use is PlatSil 71-20 RTV.
After 4 hours you have this great mold--too cool !!! I will pour the resin in a couple of weeks. I have some new projects that have popped up.
Thanks for reading my blog.